new industrial ventilation fan

Features of low-pressure fan and through-pu fan:
1. Small size-light weight-high wind and dust-low noise-high air volume.
2. Using aluminum alloy material, greatly reducing the weight, achieving the purpose of lightweight
3. The motor is I.E.C. design (above 1HP), fully closed outer fan type aluminum frame motor, special shaft design
4. Special blade design, high pressure-large air volume-noise-long life
The products of low-pressure fans and through-pu type fans are suitable for printing machinery, plastic machinery, environmental machinery, fruit machinery, woodworking machinery, textile machinery, paper machinery, electronic machinery, packaging machinery, aquaculture, sewage treatment, kilns, mining, and combustion Machines, hot air generators, dust collectors, incinerators, powder conveying, dryers, glass industry, ice making industry, mechanical cooling, general air supply, etc.
Installation and maintenance of low-pressure fan and turbo fan:
1. Before installation, check whether it is damaged or deformed due to packaging and transportation. If damaged or deformed, install and use after repair.
2. Then check whether the parts and screws are loose; whether the blades and the air duct are in collision or displacement. If they do, they should be adjusted before installation.
3. After the low-pressure fan is installed, a test machine should be performed, and the fan can be used online after the fan is operating normally.
4. When the fan is placed and used again for a long time, the fan should be checked and tested. If there is no abnormal phenomenon, it can be used online.
5. After the fan is installed, the wiring should be sealed to prevent leakage of the wiring and causing a short circuit to burn the motor.
Handling and storage of low-pressure fans and turbo fans:
1. In the process of transportation, please handle with care, transport and place according to the signs and requirements of the packing box, and do not put it upside down or stand upright.
2. During the handling process, avoid strong impact and severe vibration to prevent damage to the packaging and products
3. The fan should be stored in a ventilated, dry place without corrosive gas, and avoid rain and sun exposure.